06
OPERATION
USING THE POWER HUB
a.
Use the power switch (13) to turn on the power hub. The display (3) will show the battery status (%)
and the power output indicators will show DC OFF (1) and AC OFF (7) in red.
b.
Press AC ON/OFF button (15) to activate AC power; the AC status will change to AC ON (7).
c.
Connect your AC device(s) to the AC socket(s) (10).
d.
Press AC ON/OFF button (15) again to turn off AC power when not in use. The AC status will
change to AC OFF (7).
e.
Press DC ON/OFF (12) button to activate DC power; the DC status will change to DC ON (1).
f.
You can now connect devices any DC port (i.e. USB-A (9), USB-C (8), DC 5521 round port (17), car
cigarette port (11) or EC5 (18)).
g.
Press DC ON/OFF button (12) again to turn off DC power when not in use. The DC status will
change to DC OFF (1).
Will my AC device work with the Power Hub?
First, you need to determine the power consumption of your electronic device. This is normally written
on the device and is also specified in the user manual.
You will then need to check the output port you intend to use to ensure that the maximum
power output of the port is greater than the device requirement. If your device uses more power
than the port is able to provide, the power supply will shut off automatically.
NOTE:
1.
When the battery level is 10% or lower, the battery display (3) will turn red.
2.
When the battery level is less than 1%, both AC and DC outputs will deactivate to protect the
battery from being damaged.
3.
If the Power Hub is not going to be used for an extended period, make sure it is fully charged
before being stored.
4.
The Power Hub should be charged every 6 months if it is not being used.