7. Continue to cut more into the tree until the tree/
branch bends and the tension is released.
8. Cut the tree/branch from the opposite side of the
bend, after the tension is released.
To use the product in cold weather
CAUTION: Snow and cold weather can
cause operation problems. Risk of too low
engine temperature or ice on the air filter
and the carburetor.
1. If the temperature is 0˚C/32˚F or colder, carefully
remove the plug in the cylinder cover.
2. If the temperature is -5˚C/23˚F or colder, assemble
the winter cover on the starter housing.
CAUTION: Remove the winter cover if the
temperature increases above -5°C/23°F.
Assemble the plug in the cylinder cover if
the temperature increases above 0°C/32°F.
Risk of too high engine temperature and
damage to the engine.
Maintenance
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
Maintenance schedule
Daily maintenance
Weekly maintenance
Monthly maintenance
Clean the external parts of the prod-
uct and make sure that there is no oil
on the handles.
Clean the cooling system. Refer to
To clean the cooling system on page
32
.
Do a check of the brake band. Refer
to
To do a check of the brake band
on page 23
.
1515 - 001 - 01.07.2020
21
