10. Troubleshooting guide
Case 1. Starting failure
CHECK
PROBABLE CAUSES
ACTION
fuel tank
➞
incorrect fuel
➞
drain it and with correct fuel
fuel filter
➞
fuel filter is clogged
➞
clean
carburetor adjustment screw
➞
out of normal range
➞
adjust to normal range
sparking (no spark)
➞
spark plug is fouled/wet
➞
clean/dry
➞
plug gap is incorrect
➞
correct (GAP: 0.6~0.7mm)
spark plug
➞
disconnected
➞
retighten
Case 2. Engine starts but does not keep running/Hard re-starting.
CHECK
PROBABLE CAUSES
ACTION
fuel tank
➞
incorrect fuel or staled fuel
➞
drain it and with correct fuel
carburetor adjustment screw
➞
out of normal range
➞
adjust to normal range
muffler,cylinder (exhaust port)
➞
carbon is built-up
➞
wipe away
air cleaner
➞
clogged with dust
➞
wash
cylinder fin, fan cover
➞
clogged with dust
➞
clean
When your unit seems to need further service, please consult with our RedMax service shop in your area.
9. Storage
• Oil the blade to prevent rust.
• Empty the fuel tank and put the cap back on.
• Remove the spark plug, pour a small amount of
oil into the cylinder.
• Rotate the crankshaft several times using the
starting rope in order to distribute the oil. Put the
spark plug back in.
• Wrap the engine with a plastic sheet.
• Store the trimmer in a dry place, preferably not
in direct contact with the floor and away from
heat sources.
❲
24
❳
Summary of Contents for CHT2301
