Redline Sports 2-M01484W-GR Manual Download Page 9

Page: 9 / 14

FIGURE 7

For Customer Service Call 1-888-996-2729

STEP 6

PARTS REQUIRED:

8 pcs -

M6 x 25 mm Allen Head Bolt

1 pc -

Backboard

4 pcs -

Flat Washer

1 pc -

P11

Mechanical Scoring Arm

8 pcs -

Wing Nut

1 pc -

P12

Rim

8 pcs -

Lock Washer

1 pc -

P14

Rim Support Plate

1 pc -

Allen Wrench

Attach

P12

Rim and

P14

Rim Support Plate

to the

Backboard using

Bolts,

Lock

Washers and

Wing Nuts as shown

FIGURE 6.

Attach

P11

Mechanical Scoring Arm to

Backboard using

Bolts,

Washers,

Lock Washers

and

Wing Nuts

shown in

FIGURE 6.

Use T1 Allen Wrench

and Plyers

(not provided) to

tighten all Bolts.

P11

P12

P14

FIGURE 6

NOTE:

P11

Mechanical Scoring Arm

sensor plug must pass through

Backboard before attaching

the scoring arm.

PARTS REQUIRED:

1 pc -

Electronic Scorer

1 pc -

P10

Electronic Scorer Face Plate

1 pc -

P13

Rim Net

STEP 7

Attach

Electronic Scorer and

P10

Electronic

Scorer Face Plate to

Backboard as shown

FIGURE 7.

NOTE:

Place

P10

Electronic Scorer Face Plate

into

Backboard first, then carefully “press”

Electronic Scorer onto the four tabs on

P10

You should hear the four tabs “snap”

into place.

Loop the

P13

Rim Net through the ram horns

on the

P12

Rims

as shown in

FIGURE 7.

P13

P10

NOTE:

Use

Flat Washers

for scoring arm only.

Note: This is a special rim

designed to avoid entanglement

with the mechanical scoring arm.

Note: This is a special rim net

designed to avoid entanglement

with the mechanical scoring arm.

Summary of Contents for 2-M01484W-GR















Search results

Summary of Contents for 2-M01484W-GR

Reviews:

Brands by name

Popular brands

Redline Sports 2-M01484W-GR, Manual

Search results

Summary of Contents for 2-M01484W-GR

Reviews:

Brands by name

Popular brands