RDL-3100
RMA MODULE
PRODUCT MANUAL
70-00184-05-00
Proprietary Redline Communications © 2017
Page
9
of 25
February 17, 2017
enclosure, operational restrictions for installers and end-users, and approval of antennas
provided for use with the product.
Operation of the final product requires the 'key' be controlled exclusively by the
manufacturer. The 'key' must be unique to each module and must be installed and
activated before the radio will operate. The key must contain sufficient security features
to the professional installer and operator can not decode, modify, substitute, or
otherwise circumvent the operational restrictions imposed by the 'key'.
The software 'key' must limit the transmit power, operating frequency range, and channel
bandwidth per the regulator domain governing the location where the radio will be
deployed. The operator does not have the option to select the country or regulatory
region of operation.
The software 'key' must limit the mode of operation as a master or client. The client
mode is 'passive listener' and while in this mode the module can not initiate any
transmission without first receiving and decoding a valid authorization message from the
master. A module with a key for client operation can not be changed by the installer to
enable master mode operation.
Redline will review all final products for compliance to regulatory restrictions.
The manufacturer must meet all labeling described in section 2.3.
3.2 Module Servicing
The module is not intended to be field serviceable, and contains no field serviceable or
field replaceable parts. The module must be serviced only at an approved manufacturing
facility or service depot.
Warning:
The module is susceptible to damage from electrostatic charge.
Electrostatic Discharge (ESD) must be avoided to prevent damaging or destroying the
module. The module must always be store in an anti-static container/bag prior to
installation and following removal from the product for servicing. Observe ESD
precautions when handling the module.
