Solar PV Tiles – Installation Instructions
18 July 2012
Page 3 of 13
•
Keep the Redland PV tiles in a weatherproof environment prior to installation.
•
Carry the Redland PV tiles with both hands by the frame, avoiding touching or scratching
the face of the panels.
•
Only load as many Redland PV tiles onto the roof as you expect to install during the work
session.
•
Secure or remove any uninstalled PV tiles before leaving the roof to avoid possible wind
damage or theft.
•
Do not leave tools or unsecured materials above the Redland PV tile installation area, to
avoid potential damage to the PV tiles.
1.2 EQUIPMENT REQUIRED
•
Screwdriver or hand-held power screwdriver with pozi-drive head.
•
Voltmeter to check PV tile cable connections (Note: It is recommended to test the voltage
across every 4 connected PV tiles as the installation proceeds to check the integrity of the
PV tiles and their electrical connections).
