Redkite Savanna Instructions Manual Download Page 3

• This car safety seat is not designed for extended periods of sleep. The safety seat is not a

substitute for a cot and if the child needs to sleep it is important to lie him/her down.

• Do not leave the car safety seat in the car exposed to the sun. Some parts might heat up

and be harmful to the delicate skin of the child -check before placing the child in the seat.

• Do not use the safety seat without its fabric covering, which cannot be replaced with one

not approved by the manufacturer since it is an integral part of the safety seat and the

safety system.

• If in doubt refer to the manufacturer or retailer of the safety seat.

• Do not remove the adhesive and stitched labels since this might make the product non

compliant with legal requirements.

• Do not use the safety seat if it has signs of breakage or missing parts, is second hand, or

if it has been subjected to violent stress in an accident, because it might have suffered

extremely dangerous structural damage.

• Do not modify the product.

• Do not use this car safety seat after five years from the date of production indicated on

the structure. The natural aging of the materials may mean that it may no longer be

compliant with standards.

• The use of the safety seat for premature infants born at less than 37 weeks could cause

respiration problems for the infant seated in the safety seat. It is advisable to seek

medical advice before leaving the hospital.

• Do not use accessories not approved by the manufacturer or by the competent

authorities.

• To avoid the risk of falling, never place the safety seat on raised surfaces (tables, work

surfaces) soft surfaces (beds, sofas) or sloping surfaces.

• In the home do not use the car safety seat if the child is able to remain seated alone.

NOTICE

1.

 T

his is a "Universal" child restraint; it is approved to ECE Regulation 44.04 for 

general use in vehicles and will fit most, but not all, vehicle seats.

2.

A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook 

that the vehicle is capable of accepting a "Universal" child restraint for this group.

3.

This child restraint has been declared "Universal" under more

stringent conditions than those applied to earlier designs which do not carry this notice.

4.

If in doubt, consult either the child restraint manufacturer or the retailer.

Only suitable if the vehicle is fitted with 3-point static, 

3-point retractor safety belts, approved to UN/ECE

Regulation No. 16 or other equivalent standards.

E

X

TREME HA

Z

ARD

Do not use in passenger seats

 

equipped with airbags (SRS).

The instructions for use should be kept for future reference.

The correct use and maintenance of your car seat will ensure it gives long and

trouble free use.

When somebody else is using your car seat, ensure they also know how to use it,

especially the correct way to adjust it. The safety of your child is your responsibility.

Summary of Contents for Savanna













Reviews: