Assembly instructions
To open the chassis
1. Pull the locking catch to the side and lift the
handle upwards until it clicks in place. Fig 1
WARNING Ensure that all the locking devices
are engaged before use.
To assemble the front wheels
2. Insert the metal stem of the front wheel unit
in to the wheel holder and push upwards until it
clicks in place. Fig 2
To assemble the rear wheels
3. Insert the metal spindle of the rear wheel in to
the rear axle/brake unit and push inwards until
it clicks in place. Fig 3
To attach the seat unit
4. Insert the brackets on the seat unit in to the
joints on the frame of the pushchair until they
click in place. Fig 4
NOTE. Before first use, ensure the metal bar
on the back of the seat unit has the flap of
material wrapped around it and is fastened
with the Velcro tabs. Fig 4a
2
3
4
1
Fig 1
Parts list
1. Frame
2. Front wheels x 2
3. Rear wheels x 2
4. Combined seat unit / carry cot
5. Bumper bar
6. Apron
7. Car Seat
8. Car seat adaptors x 2
9. Raincover (not shown)
6
7
5
Lift up
Locking
catch
Fig 3
Fig 2
Metal stem
Metal stem
Front wheel
Reverse side of
seat unit
Push up
Push on
Fig 4
Fig 4a
Material flap
Push down
8
