Assembly Instructions
To open and unfold the frame
1. Hold the buggy in an upright position with the front legs
facing away from you. Release the plastic latch on the side
of the frame.
Fig 1.
2. Grasp the handles and push the front part of the buggy
away from you. Pull the handles up and out until the buggy is
in an upright position.
Fig 2.
3. Push the primary lock down. The secondary safety lock
will engage automatically.
Fig 3. Fig 3a.
WARNING Ensure that all the locking devices are
engaged before use.
To attach the front wheels
4. Push the front wheel unit onto the wheel holder on the
bottom of the leg tube, you will hear it click into place when
correctly fitted.
Fig 4.
To close
5. Retract the hood. Engage the brakes. Release the
primary lock by placing your foot in the centre, push forward
and then lift upwards. Now push down on the secondary
lock with your foot and push the handles in a forward motion.
Important: The primary lock will not disengage if you lift
upwards before pushing it away from you. Always push
forwards and then lift upwards.
Fig 5a. Fig 5b.
NOTE Before closing the buggy check the following:
A Your child is clear of moving parts
B The rear brakes have been applied
C The backrest is in its full, upright position
D The front wheels are secured in the locked mode
E The canopy is retracted
F All items have been removed from the basket
G Never attempt to close or fold the buggy with the child
inside
Accessories
A raincover is supplied with this stroller. The raincover should be
placed over the hood and folded then placed in the basket
when not is use.
Fig 1.
Plastic latch
Fig 2.
Closed
Secondary lock
Primary lock
“Click”
Fig 3. Open
Fig 4.
Fig 5a.
Fig 5b.
1. Push forward
2. Lift up
Push handles
down
