background image

2

Assembly instructions.

1. To connect the base to the back of the seat.  Squeeze the seat recline lever on the rear of the 
seat back and guide the spring loaded pins on the bottom of the seat back in to the attachment 
points on the bottom of the seat base.  Fig 1. 
With the seat recline lever still squeezed, gently pull the wings of the seat base apart and pull 
the seat back until it clicks into place.  Fig 1a. 
2. Slide the top leg frames in to the seat base making sure the numbers are facing outwards. 
Fig 2. Attach the bottom legs frames to the top leg frames ensuring the push pin has come 
through the hole and that the rubber feet are facing inwards. Fig 2a + 2b.
3. Thread the ends of the 5 harness straps through the corresponding slots on the seat. Fig 3.                     
4. Now slide the cover on to the back of the seat back. Fig 4.

5. Push the footrest in to place (fig 5) ensuring the clip is in the locked position and secure in place 

with 2 screws. Fig 5c. To remove the footrest, remove the 2 screws, push the clip in and pull the 
footrest out.
6. Squeeze the triggers on both sides of the tray and slide it on to the arms of the seat frame.  
When using the highcair, there are 3 positions available.   
Fig 6.

Using the highchair

7. To select a different height, squeeze the buttons on both sides of the height mechanism and 
raise or lower to desired position. There are 6 positions to choose from. Fig 7. NOTE. Ensure both 
sides of the highchair are in the same position.
8. To adjust the backrest squeeze the handle on the seat back and raise or lower. You can 
choose 3 different positions. Fig 8.
9. To fold the highchair pull down the catches on both sides of the rear legs and slide the feet 
together. Fig 9.
10. You can remove the tray and store it in between the rear legs. There are 2 small pegs on the 
inside of the legs to hold the tray. Fig 10.

To secure and adjust the harness

11. To secure your child in the harness, push the buckle prongs (A) + (B) into the buckle  housing (C) 
until they snap into position.  Adjust sliders to ensure a snug fit for your child.  Repeat for the other 

side and also for the shoulder straps. Fig 11. 

IMPORTANT! Always use the harness.

3

1

1. Seat base
2. Seat back
3. Seat cover and harness
4. Top legs
5. Bottom legs
6.  Footrest

7. Screws (x2)

8. Tray

Parts List

4

5

6

7

8

Summary of Contents for Feed Me Snak

Page 1: ... them for future reference Your child s safety may be affected if you do not follow these instructions Instruction Leaflet Feed Me Snak Suitable for babies up to a maximum weight of 15 kgs who can sit upright and unaided Complies with BS EN 14988 1 2 A1 2012 Customer Care Line 01454 326 568 ...

Page 2: ...6 Squeeze the triggers on both sides of the tray and slide it on to the arms of the seat frame When using the highcair there are 3 positions available Fig 6 Using the highchair 7 To select a different height squeeze the buttons on both sides of the height mechanism and raise or lower to desired position There are 6 positions to choose from Fig 7 NOTE Ensure both sides of the highchair are in the s...

Page 3: ...legs seat base push pin harness slots harness seat cover seat cover screws underneath view clip foot rest seat base seat base seat base foot rest foot rest triggers buttons seat recline lever folding catches tray storage pegs located behind tray seat base seat base seat back wings seat back seat recline grooves points for seat back pins ...

Page 4: ...rrectly fitted and adjusted WARNING Be aware of the risk of open fire and other sources of strong heat such as electric bar fires gas fires etc in the vicinity of the highchair Never place the highchair near these items Do not use for a child weighing more than 15 kgs Only suitable for children who can sit unaided Always use the 5 point harness provided Ensure that it is correctly fitted and adjus...

Reviews: