8. Slide the top of the music box through the hole in the seat cover and onto the footrest frame.
Reverse the procedure above to remove the music box and attach the clips under the seat
(9,10). Ensure the music box has been placed in the box the correct way up.
9. Clip the toy bar to each side of the bouncer frame (11). Pull the lip to remove the toy bar .
Adjusting and securing the harness
Place baby in the bouncer with the crotch strap
positioned between his / her legs. Fasten the buckles on both
sides of the restraint, pressing until you hear a ‘click’. Adjust the
sliders on both straps to achieve a snug but comfortable fit. To
release, press the clips on the buckles and remove the harness straps.
Battery Installation
Use a small Phillips head screwdriver to open the battery compartment
door on the vibration unit. Insert the battery as indicated inside the
battery door and replace the screw. The vibration unit requires 2 “C”
batteries.
CAUTION - The harness should be worn and correctly adjusted at all times.
CAUTION - Do not make any adjustments when the child is in the reclined cradle.
CAUTION - The toy bar is NOT a handle. Never attempt to carry the reclined
cradle by the toy bar.
Fig 7
Fig 9
Fig 10
Fig 11
Fig 8
