3
Connecting your tuner to your amplifier
For safety reasons, always ensure that your tuner and other components
are turned off and disconnected from mains power before making any
connections. Failure to do so may result in an electrical shock and/or
damage to your equipment.
Audio Hook-up
The Left and Right Out sockets shown on the rear of the tuner should be
connected to your amplifier input sockets marked ‘Tuner’. (Or any other
high-level input sockets (not phono).
REDGUM RGT1
Am Fm Stereo
Tuner
Made in Australia
Left
Right
Out
FM Aerial
75 ohm
Earth
Am Aerial
Follow the steps below to connect your tuner to your amplifier. Using the
supplied RCA lead.
Step
Action
1
Connect the:
??
right-out tuner socket to the respective right-in on the
amplifier;
??
and
??
Left-out tuner socket to the respective left-in on the amplifier.
2
Ensure that all connections points are clean, and that all connections
are secure. Check that wiring terminations look neat and that no
loose strands of wires are touching any other terminals. Failure to
make neat connections may result in poor sound.
