Please Note
Our goods come with a guarantee that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement part for a major failure and for compensation for any
other reasonable foreseeable loss or damage. You are
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and failure does not amount to a major failure.
3.
Load the wheelchair - The easiest way to load the wheelchair
is to use the footrests to pull the wheelchair up the carrier.
Refer figure 6 . Please ensure the push wheels are centrally
located within the wheelchair carrier frame Once loaded push
the wheelchair carrier in to the locked the horizontal position.
4.
Now secure the wheelchair with the straps provided as per
figure 7. Remove the legs rests and store in the vehicle.
5.
To unload the wheelchair remove the straps, pull the lever as
per figure 1, tilt the wheelchair to the left and roll of the carrier.
6.
To store the carrier fold as shown in figure 2, remove “R”
Clip , now holding the body of the carrier pull it towards
yourself. It can now be stored.
Specifications
Max Capacity
- 32kg
Weight
- 10.5kg
PATENT NUMBER - 2014100486
APPLIES TO THIS WHEELCHAIR CARRIER NO COPYING OR
MODIFICATION IS ALLOWED
REDGUM BRAND
1 BUSINESS WAY MALAGA
WESTERN AUSTRALIA 6944
0892484180
Warranty
12 months on the product - Any
warranty related issues should be direct
to the selling dealer
Maintenance
Please ensure the securing straps are routinely checked to ensure they in good
condition , replace if required. Lubricate the carrier mechanism with light oil to
ensure it remains easy to operate and locks into position.
WHEELCHAIR
CARRIER
PATENT NUMBER - 2014100486
PART NUMBER - RGCWCC
