
redgumbrand
.com.au
ASSEMBLY
- INSTALL BACKREST
Follow the following instructions to locate
the backrest onto the seat frame:
IMPORTANT NOTE
Please take care locating the upholstered backrest
onto the seat frame. Backrest covering may
get damaged if dragged against seat frame.
5mm
Gap
3.
Locate bolt in open
slot on both sides.
5.
Tighten ALL FOUR
BOLTS
using Allen key.
6.
Close bolt head cover.
4.
Locate lower bolt as shown.
1.
Locate bolts into
TOP HOLE ONLY
on both sides.
2.
Using the Allen Key, screw in bolts until
they are approx. 5mm from surface.
Bolt Head
Cover Cap
Washer
Bolt
6.