3
! SAFETY INSTRUCTIONS !
The Verti-Spray is designed for safe use. This can only be achieved if you completely follow
the safety instructions described in this manual.
Read and understand
the manual
before
you start using the Verti-Spray.
If the machine is not used as described in this manual, this can result in injuries and/or
damage to the Verti-Spray.
1. The user must be an expert in using the machine. The machine should be
professionally adjusted for cultivating the subsoil.
The manufacturer will not accept any liability for unprofessional use and its resulting
damage. All risks occurring with this are entirely at the expense of the user.
Following the use, maintenance and repair instructions prescribed by the
manufacturer is also considered professional use of this machine.
Inspect the area to be treated
before
using the Verti-Spray.
Remove loose obstacles and avoid irregularities.
2. The Verti-Spray is manufactured according to the latest technical
understanding and is safe to use.
When unskilled people use, maintain or repair the machine, this could result in
injuries to the user
and
to third parties.
This must be avoided
!
3. All persons assigned to operate, maintain and repair the Verti-Spray by the
owner must read and completely understand the operation manual and in
particular the chapter of
Safety Instructions
.
4. The user is
obliged to check
the Verti-Spray for
visible damage and
defects
before using the Verti-Spray.
Modifications to the Verti-Spray (including its operations) that have a negative impact
on safety must be rectified immediately.
For safety reasons it is in principle not permitted to make changes or adjustments to
the Verti-Spray (except those approved by the manufacturer).
If
modifications
to the Verti-Spray have been made, then the current CE marking is
cancelled. The person that has made these modifications has to apply for a new
CE
marking himself
.
Check the Verti-Spray for loose bolts, nuts and components
before
every operation.
Always switch off the motor and take the key out of the ignition of the towing
vehicle
in carrying out maintenance, adjustments and repairs.
With regard to the safety of the machine and the user, use only original Verti-Spray
parts for maintenance and repairs.
Only authorised technical personnel may carry out repairs to the Verti-Spray.
Keep a record of the repair activities.
5. The general applicable health & safety (Dutch: ARBO) regulations must also
be followed in addition to the instructions in this user manual.
Relevant traffic regulations also apply in case of using public roads.
