24
15.0 OPTIONS, TURF HOLD DOWN KIT
3
2
1
4
5
Fig. 15
You can use a turf hold down kit whenever the turf is loosened.
There is 1 turf hold Down Kit available:
•
For the 12mm (1/2”) tines under number :
VD1513: 211.215.000
VD1517: 211.215.012
By default, the Verti-Drain® 1513/1517 already has a pre-mounted principle beam to which
the turf hold down fingers can be attached.
The kit consists of a set turf hold down fingers for 12 mm (1/2”) and the assembly material,
consisting of several bolts and nuts.
MOUNTING THE TURF HOLD DOWN KIT (see fig. 15):
-
Plates (1) are enclosed with the ordered set. Mount the plates with bolt (2), rings (3 & 4)
and nut (5) to the principle beam. Align the plates with the tines via the slotted openings
in the plates.
-
When, after having been used for a while, the plates are bent in one direction, assemble
them the other way around.
OTHER REMARKS:
-
When the tines are no longer centred in the machine, they could hit the sides of the slots.
Align the tine blocks again.
-
Check the length of the actuating rod whenever the tines hit the front of the hole (during
operation).
Never crawl underneath the machine. Make sure that the machine is securely
blocked!
