Redexim Turf-Stripper 1200, User Manual And Parts Book, Page: 11 / 26

11
4. ATTACHING THE MACHINE TO THE TRACTOR
Checking procedure before starting to attach the Turf-Stripper.

Check the Turf-Stripper for visually discernible damage and
repair this if safe operation of the machine is no longer
guaranteed.

Check whether all the nuts and bolts are tight.

Check whether all safety stickers are present on the machine
and are not damaged.
NEVER use the machine without these items.
Figure 9
The Turf-Stripper can be attached to the tractor by means of the 3-point attachment.
The procedure is as follows:
(Figure 9)
1. Remove the 3-point pins (1 and 2).
2. Drive the tractor carefully backwards so that the lower connecting arms can
be attached to the frame.
!! Make sure that the tractor is blocked well and cannot move on its own
accord !!
!! Switch off the tractor before descending !!
3. Connect the lower connecting arms to the 3-point connecting plates using the
pins (1) and secure these with the supplied locking pins.
4. Set the stabilizer of the tractor to 100 mm lateral stroke.
5. Connect the top rod (3) to the frame with the pin (2); secure the pin (2) with
the supplied locking pin.
!! Use Float Position 4 for towing while operating the Turf-Stripper and
Fixed Position 5 for transport !!
!! Make sure that all the fastening pins are locked !!
6. Turn the top rod (3) until the Turf-Stripper stands horizontally on the ground.
7. Attach the PTO to the Turf-Stripper.
8. Attach the hydraulic hoses of the Turf-Stripper to the tractor.
9. Start the tractor and lift the Turf-Stripper off the subsoil.