18
16.1 OPTION SPIKES ON REAR ROLLER
It is possible to mount spikes on the second roller. Article number for this is:
224.120.000 for the speedseed 1200
224.160.002 for the speedseed 1600.
224.210.000 for the speedseed 2100.
224.240.000 for the speedseed 2400.
For mounting the spikes, follow the next rulles.
*Take care that when you assemble the spikes the cable and crane
can lift at least 600 kg. Crawl never under the machine, and take care
of the sharp points on the spikes.
1. Be sure the machine is blocked against moving away.
2. Lif the machine at the back side from the ground
3. Demount the rear cover plate # 2
4. Demount the rear roller # 1
5. Demount the scraper # 3 store this one till you start working without the spikes
on the second roller again.
6. Demount the brush # 4 and the blockbolts # 5. To remove the brush only
demount bolt # 6. Do not remove bolt # 7.
7. Assemble inside the rear roller # 1 on one side the four bolt M8 x 16 # 8 with
the self lock nuts # 9
8. Assemble the spikes on the roller # 10
9. Assemble the other side also the four bolts M8 x 16 # 9 with the self lock nuts.
10. Assemble the roller # 1 in the holes # 11
11. Assemble the brush # 4 with the blockbolts # 5 in the holles # 12
12. Assemble the rear cover # 2
13. Lower the machine to the ground.
2
1
3
5
5
6
7
11
12
4
10
8
9
8
