Redexim
20
13.
OPTIONAL: SPIKES ON THE REAR ROLLER
You have the possibility to mount spikes on the rear roller (see
Figure 8
).
The article numbers for these spikes are:
•
Speedseed 1100: 224.120.000
•
Speedseed 1500: 224.160.002
•
Speedseed 2000: 224.210.000
•
Speedseed 2300: 224.240.000
Please refer to the parts manual for the correct assembly.
!! When mounting the spikes, make sure that you use approved hoisting equipment,
never crawl under the machine and take into account that the spikes have sharp
points !!
1. Ensure that the machine stands firmly on the ground and cannot move.
2. Lift the rear side of the machine off the ground so that the rear roller can roll freely.
3. Dismount the protective plate at the rear side (
1
).
4. Dismount the rear roller.
5. Dismount the scraper. Save the scraper for cases in which you want to work with a
smooth rear roller.
6. Dismount the brush (
2
).
7. Mount the spike elements.
8. Mount the roller with the spikes (
3
) in the most forward position (
4
).
9. Mount the brush (
2
) in the rear position (
5
).
10. Mount the protective plate at the rear side (
1
).
11. Slowly lower the machine onto the ground.
Figure 8
