Redexim Rink DS550SP, Operating Instructions And Spare Parts Book

Page: 3 / 45

DS550SP - 3 -

Before using the RINK DS550SP Disc Spreader , the user is obliged to check for any
visible damage and defects . Changes in the RINK DS550SP Disc Spreader (including
its operation) that can have a negative impact on safety must be corrected immediately.
For safety reasons it is prohibited to make changes or additions to the
RINK DS550SP
Disc Spreader (except changes/additions approved by the manufacturer). If
modifications are done to the RINK DS550SP Disc Spreader , CE-Marking currently
applicable to the machine becomes invalid and must be replaced, independently of the
person who carried out these changes.

Before starting, check surrounding and ensure adequate visibility.

Pay attention to appropriate clothing. Wear safety shoes and long trousers. Long hair
must be tied. Do not wear loose clothing. Use appropriate personal protective equipment
in accordance with the existing workplace safety and general safety regulations.

A noise of about 74 dB (a) at the RINK DS550SP Disc Spreader accrued in the
immediate vicinity to the spreading discs.

When working with the machine, wear certified hearing protection equipment (Fig. S2).
Figure S2

On both sides of the RINK DS550SP container and the engine there are safety labels
(Fig. S2, S3, S4) with appropriate warning signs. These safety signs must always be
clearly visible, legible and in case of damage, must be replaced immediately.