H1500
- 13 -
SPECIAL EQUIPMENT
Extra brush
(to work the spreading material into the surface)
By installing the extra brush on the
RINK – Roller Spreader H1500
, material is spread and
worked into the surface within one working cycle:
- Drill out the notches (Z) on the spreader using Ø 6.5 mm and mount the stop plate (2)
with the screws (7) and nuts (10) supplied.
- Mount the brush lever (1) on both sides using the supplied screws (5), clamping washers
(11) and nuts (8) to allow for movement without play. Thus the brush can be raised,
lowered and adapted to the surface.
Remove in reverse order !
Fig. 7: Mounting the extra brush
Z
2
7
10
5
11
8
1
3
