Redexim Level-Spike 1700 Operator And Parts Manual Download Page 3

 

 

 

SAFETY INSTRUCTIONS 

 

1.   

Always use the MULTI-SPIKE with the correct tractor as described in the                   
technical information 

2. 

 The user is responsible for a safe Tractor/LEVEL-SPIKE combination. The 
combination must be tested for noise, safety, risk and easy usage. It is also necessary to 
draw up user instructions. 

3. 

 The LEVEL-SPIKE is suited exclusively to grass fields

4. 

 Every LEVEL-SPIKE user must be fully informed of the information contained in the 
user manual. 

5. 

 Inspect the ground where the LEVEL-SPIKE is to be applied. Remove loose 
obstacles, avoid uneven ground. 

6. 

 Never step off the tractor if the engine is still running. 

7. 

 Ensure that other people are standing at least 4 mtr. (14' ) away from the LEVEL-
SPIKE 

8. 

 Use appropriate clothing. Wear strong shoes with a steel enforced toe cap, long 
trousers, tie up long hair. Do not have any loose pieces of clothing. 

9. 

 Never try to force the LEVEL-SPIKE, a situation which is visible in unstable 
behavior of the MULTI-SPIKE. 

10. 

Check the LEVEL-SPIKE once a week to ensure there are no loose screws or nuts and 
bolts. 

11. 

 The LEVEL-SPIKE may never be used without protection covers and safety stickers. 

12. 

 NEVER crawl underneath the LEVEL-SPIKE. If you need to work underneath, turn 
the LEVEL-SPIKE on its front. 

13. 

 Always switch off the engine, before starting any maintenance, adjustment or repair. 
Also block the LEVEL-SPIKE against sinking and block it against forward/backward 
movement or sliding. 

14. 

 Use only the original LEVEL-SPIKE spare parts/ tines in order to ensure the safe 
operation of the machine. 

15. 

 Never use the LEVEL-SPIKE in the dark, in heavy rain, on frozen ground,  stormy 
conditions or on slopes greater than 20 degrees. 

16. 

 Maintain a log book of repairs

17. 

 If any modifications are carried out on the machine the CE certification mark will be 
no longer valid
. The User/Dealer himself must then have the machine re-certified. 

 

 

 

 

 

 

 

 

Summary of Contents for Level-Spike 1700



















Reviews: