www.altronics.com.au
Redback® Proudly Made In Australia
2
Fig 1
Paging Console
Fig 2
1
2
3
6 7
24VDC In
Volume
Mic
Chime
Volume
1 2 3 4
1
2
PA System Chime On
SW
PA System Chime Off
Internal Chime On
Internal Chime Off
On
Off
DIP Switches 1-2 Settings
ON
1 2 3 4
BGM
Volume
BGM
Input
4
5
DIP Switch Settings
DIP switches on the rear of the unit set the Pre-announcement chime options. (See Fig 2)
DIP switch 1 sets the pre-announcement chime on or off.
DIP switch 2 Not used.
DIP switch 3 Not used
DIP Switch 4 Not used
IMPORTANT NOTE:
Ensure power is switched off when adjusting DIP switches. New settings will be effective when power is
switched back on.
A 4486 Rear Panel Connections
1
24V DC connector
2.1mm DC jack (centre pin positive).
2
RJ45 connector
For connection back to the A 4487. Either port can be used.
3
DIP switch options
These switches set the chime options.
4
BGM (Background Music) Input
The background music can be connected via a 3.5mm Stereo Jack.
5
BGM volume
Use this volume to adjust the background music level.
6
Chime volume
Use this volume to adjust the chime level.
7
Microphone volume
Use this volume to adjust the microphone level.
1
2
Pre-announce Chime On
SW
Not used
On
Off
DIP Switches 1-4 Settings
Pre-announce Chime Off
3
Not used
4
Not used