www.altronics.com.au
Redback® Proudly Made In Australia 11
Redback® A 4435
Mixer 4 Input & Message Player
5.0 SPECIFICATIONS
OUTPUT LEVEL:
..........................................0dBm
DISTORTION:
............................................0.01%
FREQ. RESPONSE:
........................140Hz - 20kHz
SENSITIVITY
Mic inputs: .....................................3mV balanced
Line inputs:...........................................100mV-1V
OUTPUT CONNECTORS
Line out: ................3 pin XLR balanced or 2 x RCA
Switched out: ...............................Screw terminals
INPUT CONNECTORS
Inputs: ..................3 pin XLR balanced or 2 x RCA
............ 3.5mm stereo jack front panel
24V DC power: ............................Screw terminals
24V DC Power: ............................2.1mm DC Jack
Remote triggers: ..........................Screw Terminals
* Specifications subject to change without notice
CONTROLS:
Power:..........................................Standby Switch
Bass:...........................................±10dB @ 100Hz
Treble:.........................................±10dB @ 10kHz
Master: ....................................................Volume
Inputs 1-4: ...............................................Volume
MP3: ........................................................Volume
INDICATORS:
....................Power on, MP3 error,
...................Message
active
POWER SUPPLY:
..................................... 24V DC
DIMENSIONS:
≈................... 482W x 175D x 44H
WEIGHT:
≈............................................... 2.1 kg
COLOUR:
..................................................Black
4.0 FIRMWARE UPDATE
It is possible to update the firmware for this unit by downloading updated versions from www.altronics.com.au or
redbackaudio.com.au.
To perform an update, follow these steps.
1) Download the Zip file from the website.
2) Remove the SD card from the A 4435 and insert it into your PC. (Follow the steps on page 8 to open the SD card).
3) Extract the contents of the Zip file to the root folder of the SD Card.
4) Rename the extracted .BIN file to update.BIN.
5) Remove the SD card from the PC following windows safe card removal procedures.
6) With the power turned OFF, insert the SD card back into the A 4435.
7) Turn the A 4435 ON. The unit will check the SD card and if an update is required the A 4435 will perform the update
automatically.