background image

www.redbackaudio.com.au

Redback® Proudly Made In Australia

2

Redback® A 4270/80

 Four Zone Paging PA Amplifier

REDBACK

 is a registered trademark of Altronic Distributors Pty Ltd

You may be surprised to learn that Altronics is still manufacturing hundreds of product lines right here in Australia. We 
have resisted the move offshore by offering our customers better quality products with innovations to save them time and 
money.

Our Balcatta production facility manufactures/assembles:

Redback public address products
One-shot speaker & grill combinations
Zip-Rack 19 inch rack frame products

We strive to support local suppliers wherever possible in our supply chain, helping to support Australia’s manufacturing 
industry.

Redback Audio Products

100% developed, designed & assembled in Australia.

Since 1976 we have been manufacturing Redback amplifiers in Perth, Western Australia. With over 40 years experience 
in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with 
local product support. We believe there is significant added value for customers when purchasing an Australian made 
Redback amplifier or PA product.

Local support & feedback.

Our best product features come as a direct result of feedback from our customers, and when you call us, you speak to a 
real person - no recorded messages, call centres or automated push button options. 
It’s not only the assembly team at Altronics who are employed as a direct result of your purchase, but hundreds more at 
local companies used in the supply chain.

Industry leading 10 year warranty.

There’s a reason we have the industry leading DECADE warranty. It’s because of a long tried and tested history of bullet-
proof reliability. We’ve heard PA contractors tell us they still see the original Redford amplifier still in service in schools.

We offer this comprehensive parts & labour warranty on almost every Australian Made Redback public address product. 
This offers both installers and end users peace of mind that they will receive prompt local servicing in the rare event of any 
problems.

Published by Altronic Distributors 
© 2021 Altronic Distributors

Summary of Contents for A 4270

















Reviews: