Doc. PS1292
A 2080A
Zone Selection Panel
®
REDBACK A 2080A PA Speaker Zone Selection Panel
Proudly Assembled in Australia
Operating Instructions
Distributed by Altronic Distributors Pty. Ltd. Perth. Western Australia.
The
REDBACK
A 2080A Public Address Speaker Zone Selection
Panel allows you to select either;
1.
One speaker zone only.
2.
A combination of speaker zones.
3.
All speaker zones
This allows great flexibility when paging.
By connecting together one or more Zone Selection Panels in a ‘Daisy
Chain’ fashion, any number of speaker zones are available (eg Three
Zone Selection Panels will give you a total of 30 speaker zones).
Installation
We recommend the Zone Selection Panels for use only with 70 Volt or
100 Volt line amplifiers with a maximum load of 50 watts per zone (at
100V). Connecting these units to a 4
Ω
or 8
Ω
amplifier system may
damage your amplifier.
We have supplied an identification strip (with double sided tape)
which can be attached to the front panel of the unit. The identifica-
tion strip can be engraved to help identify your speaker zones.
Connecting one zone
selection panel.
Connecting two or
more zone selection
panels.
