background image

Model No.
Serial No.
Date of Purchase
Place of Purchase

Warranty and Specifications 

IMPORTANT NOTICE

We, the manufacturer, reserve the right to change the product and/

or specifications in this manual without notification. The manual is for 

information usage only and the pictures and drawings depicted herein are 

for reference only.

Warranty Repair and Service

Do not return this product to the store for warranty issues or repair. Call 

our customer service department at 

720-287-5182,  1-877-487-8275, 

 or visit

 

www.redbackpowerusa.com

 for the location of the nearest service center.

Record the information below for future reference.

1100 W 120th Ave., Suite 600

Westminster, CO 80234 • 720-287-5182

Redback products are distributed by

For Service or Questions

Call 1-877-487-8275

720-287-5182

www.redbackpowerusa.com

 

SKU/Part No. 

107330

Lithium Battery Voltage 

28V

Lithium Battery Capacity 

4Ah 

Motor Type 

Brushless

Blade Speed 

2900 rpm

Cutter Type 

3 Blades

Cutting Width 

9.5 inches

Cutting Height 

1 - 3 inches

Mowing Areas 

1/16 acre (~2,750 ft

2

)

 

1/8 acre (~5,500 

ft

2

)

 

1/4 acre (~11,000 

ft

2

)

Maximum Climb Angle 

30˚

Maximum Walking Speed 

1.64 ft/sec

Standard Wire Length 

330 ft

Optional Wire Length 

1,640 ft

Warranty 

2 Years Limited/1 Year Limited on Battery 

Summary of Contents for 107330

















Reviews: