background image

10

www.redbacklasers.com.au

LLR705 Receiver (Supplied with the XLG44+)

INSTRUCTIONS

The receiver comes with a staff clamp for horizontal use for levelling which 

is used in conjunction with a levelling staff much the same way as using a 

rotating laser with a rotating receiver.  The receiver also features a button 

for turning off the sound this is toggle with a long press of that button (2 

second hold).  This same button when pressed with a short press toggles 

through fine and coarse sensitivity on level, this is indicated by a green LED.

Specifications.  The range for communication between the receiver and 

motorised base is up to 15m depending on environmental conditions.  Note 

both the laser pickup and infra red communication need line of site to the 

base/laser level.  Warranty is Two Years.

Note: Instructions for the LLRMM30 are separate (XLG44+MM/XXL)

The receiver can be used hand held or together with the staff clamp with a 

staff.  The LLR705 has a 1mm level zone for maximum accuracy.

• 

A press of the Power button         on the receiver will turn on and off 

the receiver.

• 

Pressing the Speaker button          toggles speaker on and off.  Note the 

sound is different for above, below and on level.

• 

Pressing the Near/Far button           enables the receiver to best work 

within 5m for Near and over 5m for Far.  Note default mode when first 

powered up is Near (under 5m) Mode as indicated on the LCD display by 

a symbol of two triangles and a line between         .  If you are using the 

receiver beyond 5m switch to far mode indicated by a line symbol         .

The LLR705 has 3 LED light displays which indicate laser is above, below and 

on level and a large LCD display which has a progressive display indicating 

when the laser gets closer to the level mark.  If the receiver is left turned on 

without a laser being received it will auto power down after 10 minutes.

The RedBack LLR705 is an OPTIONAL receiver for the 360R & 360G models.  

It allows the laser beam to be picked up outside at up to 80m 306R and 30m 

306G in any lighting conditions.  Ideal for decking, sheds, slabs, framing and 

much more.

Summary of Contents for XLG44













Reviews: