11
Laser Receiver LR715
(Standard & Grade Kits)
The LR715 is a heavy duty dual sided display rotating laser receiver, it can be
either hand held or with the staff bracket clamped onto a staff. The bubble
vials can be used to keep the receiver level.
•
A press of the power button toggles the receiver on and off.
•
The Speaker button toggles through 3 speaker volumes.
•
Pressing the Coarse/Fine Mode button toggles through 3 levels
the first being fine mode indicated by on the LCD the accuracy of
level is at its highest with 1mm tolerance movement by the receiver
before showing it off level. The next coarser mode allows 2mm
before showing off level the third press shows no symbol on the LCD
and allows 3mm before showing off level, these two coarser modes are
more suitable for general site levelling.
•
The Back Light button toggles the LCD display back light.
The LR715 has two large LCD displays with progressive bars indicating
when the laser gets closer to the level mark. Move the receiver up and
down slowly and watch the display change when the solid tone is heard
and the centre line is shown then the receiver is at the height of the laser
beam plane. The receiver will auto power down after 10 minutes when not
receiving laser pulses.
Indicates laser beam is below
line - slide receiver down.
Indicates laser beam is above
line - slide receiver up.
Indicates laser beam is on the
line.
Power and Battery Life Indicator
Coarse/Fine and Speaker Indicator
www.redbacklasers.com.au
LR715
TM
RECEIVER INSTRUCTIONS
Summary of Contents for EL614
Page 1: ......
