8
Turning On the 2L360
To power up, simply unlock the pendulum by moving it to the “ON” position,
this will automatically self level the laser and power up the horizontal beam.
If when you unlock the pendulum all laser flash and a beeping sound is
emitted then the laser is out of self levelling range, place the laser on a more
level surface for the device to self level and power up.
To power up the vertical laser press the right function button on the keypad,
each press will cycle trough the different lasers. 1st press powers up the
vertical, 2nd press both vertical and horizontal laser lines. To power down
the laser level simply re-lock the pendulum by switching it to the “OFF”
Position.
Always transport the 2L360 laser level with the pendulum in the locked “OFF”
position to protect the device when not being used.
2L360
TM
OPERATING INSTRUCTIONS cont.
2L360G
(green beam)
2L360R
(red beam)
Summary of Contents for 2L360
Page 1: ......
