Redarc BCDCMB-009, Manual

Page: 2 / 12

2
THE BCDC MOUNTING BRACKET
The REDARC BCDC Mounting Bracket is designed to install your BCDC in the cool airflow at the front of
your vehicle, away from high temperature areas for maximum performance. The BCDC Mounting Bracket
is constructed from durable stainless steel and has been designed to fit existing mounting points in your
vehicle for ease of installation.
This manual outlines installation of the BCDCMB-009 mounting bracket in the Mitsubishi Triton MR Diesel
or Mitsubishi Pajero Sport QF.
WARNINGS AND IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS — THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS FOR THE BCDCMB-009
MOUNTING BRACKET.
DO NOT INSTALL THE BCDC MOUNTING BRACKET UNLESS YOU HAVE READ AND UNDERSTOOD THESE INSTALLATION
INSTRUCTIONS.
BEFORE FITTING, FOLLOW INSTRUCTIONS AND REVIEW YOUR VEHICLE TO ENSURE THIS KIT SUITS YOUR VEHICLE
MAKE AND MODEL SPECIFICATIONS.
• Incorrect installation of this product could adversely affect the safety systems, emissions,
functionality, reliability and structural integrity of your vehicle. Please refer to the vehicle manufacturer
or suitably qualified automotive technician for information on a safe location and method of installing
this product in your vehicle.
CAUTION
• Removing factory fitted screws may expose bare metal resulting in rust. Retouch any exposed metal
with rust inhibitor.
• Damage to cabling can cause failure of the BCDC and vehicle electrical systems.
Ensure that all wiring is clear of sharp edges, sources of heat, and moving parts, and have enough
slack to allow for flexing.
• The sheet metal contained in this product may have sharp edges that could cause cuts to fingers
and hands during handling, installation and use. The installer should take precautions and wear
appropriate safety equipment such as, but not limited to, safety glasses and gloves.
Copyright © 2021 REDARC Electronics Pty Ltd. All rights reserved.
Design and specifications are subject to change without notice.