COPYRIGHT © 2016 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
955-0116_V6.1, REV-U | 76
MONITOR CONFIG (MONITOR CONFIGURATION)
Use the Monitor Config menu to apply a look and a curve to each monitor output.
1. Select the monitor to configure from the drop-down menu at the top of the menu.
2. Select a look from the
Look
drop-down menu. Looks are set up in the Look Config menu. For more
information, go to
“Look Config (Look Configuration)” on page 75
.
3. Select a curve from the
Curve
drop-down menu:
‒
Neutral
: The camera does not apply a graded gamma space to the monitor output.
‒
Graded
: The camera applies a graded gamma space to the monitor output.
The Video Path displays the video source and graded gamma space applied to the monitor.
NOTE
: The Curve drop-down menu is available if the Video Source is set to RLF or ACES. For more
information, go to
COLOR TEMPERATURE
Select a color temperature. The range is 1700 to 10,000 KELVIN, and the default is 5600 KELVIN.
TINT
Color temperature calculations assume a pure light source that may not be true in the specific scene the
camera is imaging. To compensate for any residual colorcast, the Tint parameter adjusts the RGB color balance
with a compensating magenta-green color component. Tint range is –100 to 100, with a default of 0.000.
NOTE:
Selecting Auto White Balance calculates a new Tint value. The value does not change if you adjust the
color temperature manually. Selecting a preset resets Tint to 0.000.
PRESETS
Each preset has 0.000 Tint. Available preset options are:
Incandescent
: 2800 K
Tungsten
: 3200 K
Fluorescent
: 4500 K
Flash
: 5500 K
Daylight
: 5600 K
Cloudy
: 7500 K
Shade
: 9000 K
