CONNECTING BATTERY TO RED ONE CAMERA
Battery can be connected to the RED ONE camera through the RED BATTERY
PLATE, RED QUICKPLATE or RED CRADLE.
CHARGING USING RED CHARGER
1.
Plug AC power cord into charger AC input and power source.
2.
Turn the charger power switch ON.
3.
Insert battery into the V-plate adapter.
4.
Observe the charger LED. Charger LED will illuminate Orange during charging
(battery LED array will also illuminate displaying charge status).
5.
Remove battery when charger LED flashes Orange/Green (all battery LEDs will
be lit).
NOTE: When a cable is plugged into the 6-pin LEMO auxiliary power output,
the charging process will be suspended. The AUX LED will light up and bat-
tery LEDs on the charger will blink Green. Once the cable is unplugged, the
charger will continue the previous charging sequence and from the same point
of interruption.
NOTE: To ensure a good connection between battery and RED™ CHARGER,
RED CRADLE, RED QUICKPLATE, and/or RED BATTERY PLATE V-plate adapt-
er, it is recommended to perform a break-in sequence.
To break-in:
Fully en-
gage/disengage a RED BRICK battery approx. 20 times in V-plate adaptor.
Removing Battery
Installing Battery
POSSIBLE ISSUES AND SOLUTIONS
If your camera looses power when bumped or moved:
• Remove / reinstall battery into V-Plate adapter and ensure battery engages fully.
• Ensure lock holds battery securely and click is heard when battery is installed.
• Check battery terminal connections. If any are damaged, contact RED support.
www.RED.com/support
CONNECTING & CHARGING
BATTERY
CONNECTING & CHARGING
BATTERY
BATTERY LED ARRAY
Consists of five (5) LED’s and a button. When
button is pressed, LEDs will illuminate in rela-
tion to battery life available (in 20% steps). If
single LED blinks or no LEDs illuminate when
pressed, battery requires charging. When
charging, LEDs will illuminate indicating cur-
rent battery charge status.
Summary of Contents for RED BRICK
Page 1: ......
