RED FLORA Air, Use And Installation Manual

Page: 38 / 60

36
10-MENU ITEMS AND OPERATION
d - Tones
This function is disabled by default. To enable it proceed as follows:
• Press the “menu” key.
• Use the arrow keys to scroll through and select “Settings”
• Press “menu” to confirm.
• Use the arrow keys to scroll through and select ‘’Tones’’
• Press “menu” to confirm.
• With the + - keys, select “On/Off”.
• Press “menu” to confirm and “esc” to exit.
e - External thermostat (see dedicated chapter)
f - Auto-Eco activation (see dedicated chapter)
To select the Auto-Eco function, proceed as follows:
• Press the “menu” key.
• Use the arrow keys to scroll through and select “Settings”
• Press “menu” to confirm.
• Scroll with the arrows and select “Auto-Eco”.
• Press “menu” to confirm.
• Use the + - keys to select “On”.
• Press “menu” to confirm and “esc” to exit.
g - Eco stop T (see dedicated chapter)
To select the Eco Stop T function, proceed as follows:
• Press the “menu” key.
• Use the arrow keys to scroll through and select “Settings”
• Press “menu” to confirm.
• Scroll with the arrows and select ‘’T Eco off’’.
• Press “menu” to confirm.
• With the + - keys, insert the minutes (from 1 to 30’).
• Press “menu” to confirm and “esc” to exit.
AUTO ECO MODE (see above paragraph activation and switching off)
For activation of the “Auto Eco” mode and time settings, see paragraphs 8 f and 8 g respectively.
‘’ECO stop T’’ can be adjusted to ensure correct operation in the various environments in which the stove can be installed and to avoid
constant stopping and starting when the room temperature is subject to sudden change (drafts, poorly insulated rooms, etc.).
The ECO stop procedure is activated automatically when the power recall device is satisfied (room probe +1°C or external thermostat
with an open contact), the “ECO stop T” starts to decrease the time (factory default 5 minutes, which can be changed from the “Settings”
menu). During this phase, the panel alternates between displaying ON with a small flame and Crono (if active) - Eco active. The minutes
counting down to the Eco Stop are shown at the top of the display. The flame moves to P1 and remains there until the set “T Eco Stop” time
reaches zero, and if the conditions are still satisfied, turns off the boiler. The ECO stop count is cancelled if one of the devices recalls power.
When the boiler begins to turn off, the panel shows: Off - Eco Active - flashing small flame.
When the stove turns off, OFF-ECO appears on the display with the flame symbol off.
The following conditions have to be met simultaneously for the ECO to restart:
• room probe -1°C or external thermostat with a closed contact (for at least 20” in order to prevent false recalls)
• 5 minutes have passed since shut-down.