COMPATIBLE LENSES
RED Lens Control Motors can be equipped with accessory drive gears to interface with lenses using any of the
following gear modules:
0.8 M
0.4 M
0.5 M
0.6 M
As with most lens control motors, there are some lenses that are too large, too heavy, or too stiff for the RED DLM1
motor. Additionally, cold ambient temperatures may also make it more difficult for the motor to rotate the lens.
NOTE:
For information about lenses with default profiles, refer to
"W.M.D. Lens Profiles" on page 31
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
6 2
RED 3-AXIS SYSTEM OPERATION GUIDE
