Red Sound micro bpm, Owner'S Manual

Page: 5 / 10

MOUNTING/CONNECTIONS
When you have chosen the best
mounting option for your setup, connect
the MICRO BPM into your system as
follows:
1. Using the input cable ,
connect the 3.5mm plug end to the
socket marked ‘INPUT’ on
the panel.
2. Connect the 6.3mm right-angled plug
end of the cable to the headphone
monitor output on your mixing desk.
(Ensure that the headphone level control
on the mixing desk is turned right down
at this stage)
3.
Connect the 6.3mm plug from your
headphones to the MICRO BPM socket
marked
on the front panel.
supplied
MICRO BPM
rear
Connect the output plug of the AC
power adaptor to the MICRO BPM’s
power in socket on the rear panel.
4.
You can choose from three mounting options
included with the MICRO BPM.
1. - Stick one in each corner on
the underside panel for free mounting.
2. - Stick one
either side of the serial number label on the
underside panel. Locate a flat, clean surface
on your equipment/rig, peel-off film and press
firmly into place for a permanent mounting.
3.
- The MICRO BPM
can be conveniently located on either side of a
mixing desk for a semi-permanent mounting.
Rubber feet
Double sided adhesive pads
Brackets, for use with 19” rack mount
holes on mixing desks
CONNECTING THE
MICRO BPM TO YOUR
SYSTEM
MOUNTING THE MICRO BPM
HEADPHONES
INPUT CABLE
(SUPPLIED)
TO AC
ADAPTOR
19” RACK
Hole pitch
range =
Min 90mm
Max 240mm
Rotate the chrome brackets
to line-up with the 19”
rack mounting holes on
your mixing desk.
M3 SCREW
(LENGTH = 5mm MAX)
BRACKET
M6 SCREW
M6 NUT
DJ MIXING DESK PANEL
19” RACK MOUNT HOLE
HEADPHONE
OUTPUT
LEVEL
MIXING DESK
/
3
PA
G
E