background image

4

USER MANUAL

▪  

Red Rooster Lifting Limited 

 Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ 

 Tel: +44 (0) 1651 872101 

 

M01-AH6 REV3

INTRODUCTION AND SPECIFICATION

 

 

Thank you for choosing the TCR pneumatic chain hoist which are available from 250 kg to 2 tonne.

 

Provided that the hoist is used and maintained in accordance with this manual it will afford you many years of reliable service.

 

Red Rooster hoists comply with the latest standards and are designed for safe and efficient operation.

 

Before installing the unit, please ensure that both the personnel responsible for installation, maintenance and operation are fully acquainted 

 

with the sections of this manual which are relevant to them.

 

This manual should be accessible at all times to the relevant person, in case of loss ask your dealer for a new copy.

 

Specification sheet gives full details of actual model supplied.

 

The nameplate fitted to the hoist gives the details to identify and get further information on the hoist.

 

Notations: 

The following notations are used throughout this manual.

 

 

 

Failure to follow this instruction may result in a dangerous occurrence or fatal injury

 

 

 

Failure to follow this instruction may result in premature wear of the hoist or a component part of the hoist

SWL 

(TONNE)

MODEL

CHAIN 

FALLS

WEIGHT (KG)

FULL LOAD 

LIFTING 

SPEED 

(M/MIN)

FLR

SIZE

MINIMUM 

HOSE SIZE 

(ID)

3M HOL 

EXTRA P/M

0.25

TCR-250

1

7

0.35

9.3

0.5"

0.5”

0.25

TCR-500

1

31.1

0.8

10.5

0.5"

0.5“

0.5

TCR-500/2

2

9

0.7

4.5

0.5"

0.5“

0.5

TCS-500

1

19

0.8

43

0.5"

0.5“

0.5

TCR-500

1

31.1

0.8

9.5

0.5"

0.5“

1.0

TCR-1000/2

2

35.2

1.6

4.8

0.5"

0.5“

1.0

TCR-1000

1

34

1.1

6.0

0.5"

0.5“

2.0

TCR-2000/2

2

39.7

2.2

3.0

0.5"

0.5“

DANGER

CAUTION

Summary of Contents for TCR-1000































































Reviews: