INSTALL THE FOCUS HOOK
For more information on the focus hook storage location and mounting point, go to
REQUIRED TOOLS:
1.5 mm hex key, slotted screwdriver
1. Remove the M3x0.5 x 3 mm set screw from the focus hook mounting point on the media bay using a 1.5 mm hex
key.
NOTE:
Store the screw in a safe location, or install it in the focus hook storage location after you remove the focus
hook in
2. Remove the focus hook from the focus hook storage location on the media bay using a slotted screwdriver.
3. Tighten the focus hook into the focus hook mounting point on the media bay using a slotted screwdriver.
WARNING:
DO NOT OVERTIGHTEN.
C O PYR I G HT © 2 0 1 7 R ED.C O M , I NC
9 5 5 - 0 1 2 7 _V 6 .3 , R EV - M
|
4 4
RED RAVEN OPERATION GUIDE
