5) Flight Camera Video Power Connector & Reserved datalink interface.
The flight camera video connector is a 3 pin connector located bottom of PCBA. If you want to
change the camera ,such as Gopro3/4 ,the pinout is as follow : 1. AV-IN 2. Gnd 3. +5V .
Reserved datalink interface is a 4 pin connector, the pinout is as follow:1.GND 2.TXD 3.RXD 4.+5V
6) PPM/PWM Connector . If you choose PPM , please use configuration software to enable PPM
input , PPM receiver :CH1 GND +5V . Disable PPM input ,it will be change to PWM receiver .
7) XT-60 Battery Connector and special protection . The pre-installed XT60 plug is compatible with
most batteries . CMR280 have a special design ,if large forces are applied to the plug, it will not
damage the circuit board.
Summary of Contents for CMR280
