Step 7
Connect the Cylinder Holder (D) to the four legs
with (4) M5 x 10 bolts (AA). The side with
cylinder locking bolts must face the door panel.
Note: With the help of a friend, turn the gas fire
pit into upright position after this step finished.
Step 8
Put the Glass Rocks (L) on the burning area of Table Top(A).
Note: Place the Cover Lid (K) onto the Table Top (A) when
not in use.
"WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury."
ASSEMBLY INSTRUCTIONS
Page 11 of 19
