Revised 2016-05-25
Installation
Drawing No. LP0986
Installing/Mounting
2-10
N-Tron® Series Unmanaged Gigabit Industrial Mid-Span PoE+ Injector Hardware Guide
DIN-Rail Mounting
a.
Install the unit in a standard DIN-Rail. Recess the unit to allow at least 2” of horizontal clearance for
CAT5e cable bend radius or 5” of horizontal clearance for Fiber Optic cable bend radius.
URMK
1000-PM
1K26-PMK
Most Red Lion N-Tron Series products are designed to be mounted on industry standard 35mm DIN-Rail. How-
ever, DIN-Rail mounting may not be suitable for all applications. Our Universal Rack Mount Kit (P/N: URMK) can
be used to mount the POE+ injectors enclosures to standard 19" racks, and our Panel Mount Assembly (P/N:
1000-PM) can be used to mount the 1000 Series enclosures to a panel or any other flat surface.The 1000-POE4+
will require the 1K26-PMK panel mount.
b.
To install the unit to 35mm industrial DIN-Rail,
place the top edge of the included mounting bracket
on the back of the unit against the DIN-Rail at a 15°
angle as shown. Rotate the bottom of the unit to the
back (away from you) until it snaps into place.
c.
To remove the unit from the 35mm industrial
DIN-Rail, pull forward on the unit until it
disengages from the bottom of the DIN-Rail.
Rotate the bottom of the unit towards you and up
at an approximate 15° upward angle to
completely remove the unit.