BATTERY & TIME KEEPING
A battery is used to keep time when the unit is without power. Typical
accuracy (at 25°C) of the Graphite time keeping is less than one minute per
month drift. The battery of a Graphite unit does not affect the unit’s memory, all
configurations and data is stored in non-volatile memory.
Changing the Battery
To change the battery of a Graphite, first remove power to the unit. Remove
the battery cover. Grasp the top edge of the battery and push to the left to remove
the battery from the holder. Lift the battery out and replace with a new battery.
Replace the battery cover, and re-apply power. Using Crimson or the unit’s
keypad, enter the correct time and date.
* Please note that the old battery must be disposed of in a manner that
complies with your local waste regulations. The battery must not be disposed of
in fire, or in a manner whereby it may be damaged and its contents could come
into contact with human skin.
The battery used by the panel is a lithium type BR2032.
WARNING - EXPLOSION HAZARD - DISCONNECT POWER
AND ENSURE THE AREA IS KNOWN TO BE NON-HAZARDOUS
BEFORE SERVICING/ REPLACING THE UNIT AND BEFORE
INSTALLING OR REMOVING I/O WIRING AND BATTERY.
+
-
TYPE B
USB
ST
AT
US USB HOST
ST
AT
US
PORT B
PORT A
COMM
RT
S (PIN 6)
Tx
CTS (PIN 1)
Rx
COMM
RT
S (PIN 6)
Rx
COMM
Tx
COMM
CTS (PIN 1)
(NIC)
ETHERNET
RxB
Tx
A
(PIN 8)
COMM
TxB
TxEN
TxB (PIN 1)
RxA TxA
AUXILIARY
ETHERNET
(NIC)
COMMS PORT
PGM PORT
COMMS PORT
RS232
RS485
RS232
DEVICE
USB
POWER
-
+
USB HOST
PORT A (PGM)
RS232
RS232
PORT B
PORT A
RS485
AUXILIARY
ETHERNET
POWER
CHASSIS
COMMON
+DC VO
LT
AGE
1
2
3
CONNECTOR
[OPTIONAL]
A
B
ETHERNET
G09 PORT PIN OUTS
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
