red lion EB Series, User Manual

Page: 17 / 23

Etherbus Hardware Manual Page 17 of 23 Last Revised: 17-Sep-13
Red Lion Controls

331 Ushers Road

Ballston Lake, NY 12019

USA

+1-518-877-5173

support@redlion.net
PoE Injector
RJ45 Wiring
The Etherbus industrial Ethernet PoE injectors have two RJ45 connectors per PoE channel.
See the diagram below. One RJ45 port is labeled as ETH IN (for Ethernet Input) and the other
is Labeled as PoE OUT (for PoE Output). Connect your standard Ethernet (non-PoE) cable to
the ETH IN port. This cable is typically coming from an Ethernet switch or router. Then
connect the cable to be run to your PoE Powered device (PD) to the PoE OUT port. The PoE
LED will be ON when power is being sourced to your device.
PoE Splitter
RJ45 Wiring
The Etherbus industrial Ethernet PoE splitter has two RJ45 ports. See the diagram below.
One RJ45 port is labeled PoE IN (for PoE input) and the other is labeled ETH OUT (for
Ethernet output). Connect the cable from your PoE (PSE) switch or injector to the PoE IN
port. Then connect the cable to be run to your standard Ethernet (non-PoE) device to the
ETH OUT port which does not have any power on it.