LEDS
STS – STATUS LED
The Status LED is a dual color LED that provides information regarding the
state of the module. This includes indication of the various stages of the start-up
routine (power-up), as well as any errors that may occur.
Startup Routine
Error States
ALM – ALARM LED
The Alarm LED indicates the presence of a fault condition.
FIRMWARE UPGRADE
The module’s firmware is stored in flash memory so that software/hardware
conflicts are avoided, and so that software features may be added in the future.
During a download, Crimson compares its own library of firmware files with
those stored in the Master module. If they do not match, Crimson will download
the necessary files. The Master then checks to make sure that the I/O modules
contain the same firmware. If they contain a different revision, the Master will
automatically copy those files into the module's flash memory. During this
process, the module LEDs will flash rapidly, starting with the top row, and
progressing through the remaining rows until the process is complete.
CONFIGURATION
Programming is done via Crimson, a Windows
®
compatible configuration
interface. Please see the Crimson manual for more information.
Solid Red
Module not controlling, and not communicating.
Green/Pulsing Red
Module is controlling properly, but has lost
communication with the Master.
ORDERING INFORMATION
Note: Certain modules are not suitable for use in Hazardous locations. Check each module’s specifications prior to installation.
1
Visit www.redlion.net for a complete list of PID modules, data acquisition modules, communications drivers and cables.
2
Free at www.redlion.net
Programming Cable for CS, G3, & Paradigm Series
Crimson Programming Software
2
Communications Cables
1
Crimson Programming Software, Manual, and Download Cable
Rail Stops (Qty 2)
Replacement Base
Replacement Termination Plug
CBL
Communication Cables
(10 feet)
Software
Accessories
CBLPROG0
SFCRM
CBLxxxxx
SFCRK
RSRSTP00
CSBASE00
CSTERM00
4-Channel Analog Output Module
Modular Controller Master, Multi Comms ports and Ethernet
CSOUT
1
CSMSTR
Analog Output Module
Master Module
CSOUT400
CSMSTRGT
CSMSTRSX
DESCRIPTION
MODEL NO.
TYPE
PART NUMBER
Module performing normally.
Green
Module switching to configuration.
Steady Red
Module is currently running the boot loader and/or
being flash upgraded by Crimson. This occurs for
four seconds during a power up.
Rapidly Flashing Red
CSMSTRV2
Modular Controller Master with multiple protocol converter, data
logger, web server with Virtual HMI up to VGA (640 x 480) size
and expansion slot with increased SDRAM
Modular Controller Master with multiple protocol converter, data
logger, web server with Virtual HMI up to QVGA (320 x 240) size
and expansion slot.
LIMITED WARRANTY
The Company warrants the products it manufactures against defects in materials and workmanship for a period limited to two years from
the date of shipment, provided the products have been stored, handled, installed, and used under proper conditions. The Company’s
liability under this limited warranty shall extend only to the repair or replacement of a defective product, at The Company’s option. The
Company disclaims all liability for any affirmation, promise or representation with respect to the products.
The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against damages, claims, and expenses
arising out of subsequent sales of RLC products or products containing components manufactured by RLC and based upon personal
injuries, deaths, property damage, lost profits, and other matters which Buyer, its employees, or sub-contractors are or may be to any
extent liable, including without limitation penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and liability imposed
upon any person pursuant to the Magnuson-Moss Warranty Act (P.L. 93-637), as now in effect or as amended hereafter.
No warranties expressed or implied are created with respect to The Company’s products except those expressly contained herein. The
Customer acknowledges the disclaimers and limitations contained herein and relies on no other warranties or affirmations.
Red Lion Controls
Headquarters
20 Willow Springs Circle
York PA 17406
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
Red Lion Controls
China
Unit 101, XinAn Plaza
Building 13, No.99 Tianzhou Road
ShangHai, P.R. China 200223
Tel +86 21 6113-3688
Fax +86 21 6113-3683
Red Lion Controls
Europe
Printerweg 10
NL - 3821 AD Amersfoort
Tel +31 (0) 334 723 225
Fax +31 (0) 334 893 793
Red Lion Controls
India
54, Vishvas Tenement
GST Road, New Ranip,
Ahmedabad-382480 Gujarat, India
Tel +91 987 954 0503
Fax +91 79 275 31 350
