CLEANING AND MAINTENANCE
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must
not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots
(ceiling, suspension, trussing).
3
）
Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4
）
The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning
to the lights.
1
）
Clean the inside and outside lens each week to avoid the weakneness of the lights due to
accumulation of dust.
2
）
Clean the fan each week.
3
）
A detailed electric check by approved electrical engineer each three month,make sure that the
circuit contacts are in good condition,prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device.Please use a moist,lint- free cloth.Never use
alcohol or solvents.Should you need any spare parts,please order genuine parts.
Technical Parameters:
Rated voltag
e
：
AC 110V-220V ±10
％
Rated frequency
：
50Hz-60Hz
Power consumption
：
100W(MAX)
Quantity of lights
：
24×5W RGB(3 in 1)+4×3W White
Control channel: 6
Control signal
：
DMX-512 international standard signal
Control mode
：
DMX-512 signal control,music control,automatic,master and slave
Operating environment: indoor
Summary of Contents for QUADRO L 24
Page 1: ......
