•
Make sure the pool pump is turned OFF.
Expel all the air from the hose.
Attach Flow Control Valve to the male hose
(smaller end) . See Fig 6.
Insert the Flow Control Valve into the
Weir/Skimmer. If necessary, use the Control
Valve Adaptor to ensure a good connection.
See Fig 7.
Turn the pool pump ON.
Your
pool cleaner will now begin
automatically vacuuming your pool.
•
•
•
•
•
Orbit
PAGE 5
The Flow Control Valve ensures your
pool cleaner receives the flow required
to ensure optimum performance.
Orbit
STEP 5: CONNECTING & USING THE FLOW CONTROL VALVE
The Flow Control Valve is preset
position
This provides the
ideal operating flow in most pools But if
necessary the flow can be adjusted by
using any setting from Position
through
minimum flow, to slow
your cleaner down
maximum flow,
your cleaner will run faster
See Fig 8.
3-4.
.
,
1
6 (1=
, 6 =
).
between
Figure 8
Control Valve
Adaptor
Flow Control
Valve
Attach Male
Hose Adaptor
(smaller end)
Press into bottom
of skimmer
Figure 6
Figure 7
Top of Skimmer
Attach
Hose This
End
Hose through
Skimmer
Opening
Control Valve
Adaptor
Flow Control Valve
