Product Code: RLATJ20T
Made in China to TQB Brands Pty Ltd specifications
Page 9
Visit us at www.tqbbrands.com.au
8.
Before raising the vehicle double check and verify the saddle is centred and
also has full contact with the lifting point.
9.
Squeeze air trigger to lift until saddle contacts
load. (To stop air operation, simply release the
grip on the lift control valve.) Continue to pump
the jack to lift the vehicle to the desired height.
10.
After lifting, support the load with appropriately rated vehicle support
stands before working on the vehicle.
4.2.
Lowering the Jack
1.
Raise load high enough to allow clearance for the jack stands to be
removed, then carefully remove jack stands.
2.
Grasp the handle firmly. Securely hold on to the jack
handle so your hands do not slip and ensure the release
valve does not rapidly lower.
3.
Carefully open the release valve by slowly turning the
handle counter clockwise. (Do not allow bystanders
around the jack or under the load when lowering the
jack).
4.
After removing the jack from under the vehicle,
fully retract the jack to reduce ram exposure to
rust and contamination. Push the ram and handle
sleeve down to reduce exposure to rust and
contamination.
WARNING:
USE EXTREME CAUTION WHEN LOWERING THE JACK. THE JACK HANDLE MAY
TURN RAPIDLY, OPENING THE RELEASE VALVE TOO FAST CAN CAUSE THE JACK TO LOWER
RAPIDLY, FAILURE TO HEED THESE WARNING MAY CAUSE SERIOUS INJURY OR DAMAGE.
