To open the bouncer
Lift the seating section upwards and slot the height adjustment bar into one of the
three openings. Push downwards on the seat area until you hear it click in place.
Fig 1.
To adjust and close the bouncer
With one hand on the floor frame, pull forward on the seat frame to unclip the
adjustment bar from the bracket. Select new height position or pull the c
lip (A)
upwards which will allow the bouncer to be folded for storage and transportation.
Fig 2.
To clean the bouncer cover
The cover can be removed by unclipping the elastic loops on the bottom and pulling
the cover off. Always ensure the elastic loops are always attached to the clips
before each and every use.
Fig 3.
To use and secure the harness
The safety belt has two openings, one on each side. Press the
center
button to
release the belt and push together to secure it.
Fig 4.
To attach the toy bar
Push the clips on each end of the toy bar on to the seat frame firmly, either
above or below where the harness is attached.
Fig 5.
Fig 1
Fig 2
Fig 3
Fig 4
Fig
5
Never use the toy bar to
carry the reclined cradle.
It is designed to easily
detach if pulled.
Toy
bar
Height adjustment bar
Elastic loops
Adjustment joint
A
