Red Jacket LPG Premier, Installation Manual, Page: 15 / 40

Introduction The Manifold
11
The Red Jacket LPG pump can also be installed in a horizontal manifold. The pump unit must be supported by
three load bearing supports inside the manifold. The manifold is generally mounted underneath the storage vessel
and requires a vapor return/equalization line back to the vapor space of the storage vessel. Figure 3 illustrates a
recommended horizontal manifold for the Red Jacket LPG pump and Table 4 contains an itemized list for the
Figure 3 manifold.
Figure 3. Horizontal Manifold With Red Jacket LPG Pump-Motor Unit
31 Relief valve 1/4 Rego 3127 G
32* Manhole cover
NW 420
(
φ
525 mm)
33 Check valve 2 Rego A3186
34* Control rod
Table 3. Recommended Material List for Vertical Manifold with Red Jacket LPG Pump-Motor Unit (ref. Figure 2)
Item Description
Size
(inches)
Recommended
Manufacturer Type/Remark Other
DIRECTION ARROW
LIQUID LINE WITH
VAPOR LINE
FLANGE
FLANGED VALVE
33
3
2
1
4
MANIFOLD
5
6
20
1-1/4" DISPENSING LINE
FILL 2"
32
21
3/4" VAPOR LINE
27
19
28
11
9
22
29 30 31
15
10
13
21
26 25
24 17 16
14
23
7
8
12
3/4" VAPOR LINE
3
3
18
rj/051-327-fig8.eps