Red Hat NETWORK PROXY 5.3.0 -, Installation Manual

Page: 41 / 48

37
15. In the
Configure Monitoring
page, provide or confirm the hostname and IP address of the parent
server connected to by the RHN Proxy Server. This must be either an RHN Satellite Server or
another Proxy which is in turn connected to a Satellite.
You cannot achieve Monitoring through the
central RHN Servers.
When finished, click
continue
. The
Install Progress
page appears.
Figure A.8. Install Progress
16. In the
Install Progress
page, you may monitor the steps of the installation as they take place.
Click the link to any step to go to its
Action Details
page. When an action begins, its status goes
from
Queued
to
Picked Up
and then finally to
Completed
. Like the earlier package installs,
you can immediately trigger these steps by running the
rhn_check
command in a terminal on
the system as root. When finished, the
Install Progress
page will display the message
The
installation is complete.
You may now begin registering systems to be served by the
RHN Proxy Server. Refer to the
RHN Client Configuration Guide
.
17. When all items on the
Install Progress
page are
Completed
, the Proxy is ready for use. You can
now register systems to RHN through the Proxy.